best pressure sensitive hot melt adhesive manufacturers

Why You Should Use Conformal Coating To Protect Electronic PCB Circuit Boards

Why You Should Use Conformal Coating To Protect Electronic PCB Circuit Boards

The circuit board is the most essential part of electronics design. It is responsible for carrying electrical signals to and from the motherboard, peripheral cards, and power supply so that they can perform their designated functions. Without a circuit board, modern technology would not even exist. That’s why manufacturers of electronic products need to take every precaution possible to protect these delicate devices from exposure to harmful substances and extreme temperatures.

Best Pressure Sensitive Adhesive Manufacturers In China
Best Pressure Sensitive Adhesive Manufacturers In China

Conformal Coating Overview

Conformal coating is a thin layer of material that is applied to the surface of an electronic circuit board. This coating protects the circuit board from the environment and prevents damage to the components. Conformal coating is available in various materials, including acrylic, polyurethane, silicone, and epoxy.

Conformal coating is applied using various methods, including spray, dip, and brush. The most common way is a spray used for large circuit boards. Dip and brush methods are typically used for smaller boards or areas that are difficult to reach with a sprayer.

Conformal coating can be applied before or after the circuit board is assembled. If used before assembly, it is essential to ensure that the layer does not come into contact with any components. The components must be protected from the coating material if applied after assembly.

Conformal coating is typically applied in a controlled environment to ensure that the coating material does not come into contact with dust or other contaminants. The coated circuit board is then placed in a curing oven to harden the coating.

Conformal coating provides several benefits to circuit boards. It protects the components from damage due to moisture, humidity, and other environmental factors. It also prevents short circuits by insulating the conductive paths on the circuit board.

Conformal coating can also improve the reliability of circuit boards by reducing the risk of solder joint failure. Solder joints are often the weakest point on a circuit board.

Advantages of Conformal Coating

Conformal coating provides many advantages over other methods of protecting electronic circuit boards. It is an extremely thin film applied to the board’s surface, and it conforms to the contours of the circuit board, providing a uniform layer of protection. Conformal coating is also highly resistant to moisture and chemicals, making it ideal for protecting circuit boards exposed to harsh environments.

Disadvantages of Conformal Coating

The conformal coating does have some disadvantages. One is that it can be expensive. Another is that applying can be difficult, especially if you need the proper equipment. Finally, if the coating is not applied correctly, it can cause problems with the circuit board.

How to Choose the Right Material?

When choosing the suitable material for your conformal coating needs, there are a few key factors you’ll want to keep in mind. The first is the environment in which the coated PCB will be used. If it is exposed to harsh chemicals or high temperatures, you’ll need a material that can withstand those conditions. There are a variety of conformal coatings on the market that are designed for different applications, so make sure to choose one that’s appropriate for your needs.

Another essential factor to consider is the thickness of the coating. Too thin and it won’t provide adequate protection; too thick and it could interfere with the circuit board’s performance. The thickness will also affect the drying time, so factor that into your decision.

Finally, you’ll want to consider the cost of the conformal coating material and compare it to other options on the market. In many cases, price shouldn’t be the only deciding factor, but it’s something you’ll need to take into account nonetheless.

By keeping these factors in mind, you can be sure to choose the suitable material for your conformal coating needs.

Common Design Flaws and How To Prevent Them

Regarding the design of electronic circuit boards, a few common flaws can lead to problems down the line. Here are some of the most common design flaws and how you can prevent them:

More clearance around components: Components on a circuit board need more support around them, so they don’t come into contact with each other or other parts of the board. This can cause shorts or other problems.

Traces that are too close together: Traces on a circuit board need to be spaced far enough apart, so they don’t short out. This is especially important for high-current traces.

More vias: Vias are connections between layers of a circuit board. They’re essential for routing signals and power around the board. If there aren’t enough vias, signals can get lost or corrupted.

Improper use of ground planes: A ground plane is a large area of copper on a circuit board that provides a low-impedance return path for signals and power. If it’s not used correctly, it can cause many problems.

These are just a few of electronic circuit boards’ most common design flaws. You can help prevent them from happening in your designs by being aware of them.

What is the Proper Procedure for Applying Conformal Coatings?

There are many different types of conformal coatings, each with its specific application process. However, general steps should be followed when applying a conformal coating to an electronic circuit board.

1. The first step is to clean the circuit board. This can be done with various methods, but it is essential to remove all dirt, grease, and other contaminants from the board’s surface.

2. Once the board is clean, a thin layer of conformal coating material should be applied evenly over the entire surface.

3. The coated board should be cured using either ultraviolet light or heat.

4. After curing, the circuit board will need to be inspected to ensure that the coating is applied correctly and that there are no defects.

One Component Epoxy Adhesives Glue Manufacturer
One Component Epoxy Adhesives Glue Manufacturer


Conformal coating is essential for protecting electronic circuit boards from harsh environments. By using conformal coating, you can extend the lifetime of your circuit boards and improve their performance in various applications. If you are looking for a way to improve the reliability of your electronic devices, consider using a conformal coating to protect your circuit boards.

For more about why you should use conformal coating to protect electronic pcb circuit boards,you can pay a visit to DeepMaterial at for more info.

has been added to your cart.
en English