Enabling electronic products to achieve functional characteristics and performance specifications through superior bonding performance of electronic adhesives is just one aspect of DeepMaterial’s electronic adhesives solution. Protecting printed circuit boards and electronic precision components from thermal cycles and harmful environments is another key component in ensuring product durability and reliability.

DeepMaterial not only provides materials for chip underfilling and COB packaging but also provides conformal coating three-proof adhesives and circuit board potting adhesives, and at the same time brings excellent circuit board-level protection to electronic products. Many applications will place printed circuit boards in harsh environ- ments.

DeepMaterial’s advanced conformal coating three-proof adhesive and potting. Adhesive can help printed circuit boards resist thermal shock, moisture-corrosive materials and various other unfavorable conditions, so as to ensure the product has a long service life in harsh application environments. DeepMaterial’s conformal coating three-proof adhesive potting compound is a solvent-free, low-VOC material, which can improve process efficiency and take into account environmental protection responsibilities.

DeepMaterial’s conformal coating three-proof adhesive potting compound can improve the mechanical strength of electronic and electrical products, provide electrical insulation, and protect against vibration and impact, thereby providing comprehensive protection for printed circuit boards and electrical equipment.

Product Selection and Data Sheet of Epoxy Potting Adhesive

Product line Product Series Product Name Product Typical Application
Epoxy Based Potting Adhesive DM-6258 This product provides excellent environmental and thermal protection for packaged components. It is especially suitable for the packaging protection of sensors and precision parts used in harsh environments such as automobiles.
DM-6286 This packaged product is designed for applications that require excellent handling performance. Used for IC and semiconduc- tor packaging, it has good heat cycle capability, and the material can withstand thermal shock continuously to 177°C.

 

Product line Product Series Product Name Colour Typical Viscosity (cps) Initial Fixation Time / full fixation Curing Method TG/°C Hardness/D Store/°C/M
Epoxy Based Potting Adhesive DM-6258 Black 50000 120°C 12min Heat curing 140 90 -40/6M
DM-6286 Black 62500 120°C 30min 150°C 15min Heat curing 137 90 2-8/6M

Selection And Data Sheet of UV Moisture Acrylic Conformal Coating Three Anti-adhesive

Product line Product Series Product Name Product Typical Application
UV Moisture Acrylic
Acid
Conformal Coating Three Anti- adhesive DM-6400 It is a conformal coating designed to provide strong protection from moisture and harsh chemicals. Compatible with industry standard solder masks, no-clean fluxes, metallization, components and substrate materials.
DM-6440 It is a single-component, VOC-free conformal coating. This product is specially designed to quickly gel and cure under ultraviolet light, even if exposed to moisture in the air in the shadow area, it can be cured to ensure the best performance. The thin layer of coating can solidify to a depth of 7 mils almost instantaneously. With strong black fluorescence, it has good adhesion to the surface of various metals, ceramics and glass filled epoxy resins, and meets the needs of the most demanding environmentally friendly applications.
Product line Product Series Product Name Colour Typical Viscosity (cps) Initial Fixation Time
/ full fixation
Curing Method TG/°C Hardness/D Store/°C/M
UV Moisture
Acrylic
Acid
Conformal
Coating
Three
Anti-
adhesive
DM-6400 Transparent
liquid
80 <[email protected]/cm2 moisture7 D UV +
moisture
dual curing
60 -40~135 20-30/12M
DM-6440 Transparent
liquid
110 <[email protected]/cm2 moisture2-3 D UV +
moisture
dual curing
80 -40~135 20-30/12M

Product Selection And Data Sheet of UV Moisture Silicone Conformal Coating Three Anti-adhesive

Product line Product Series Product Name Product Typical Application
UV Moisture Silicone Conformal Coating
Three Anti-adhesive
DM-6450 Used to protect printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. This product is usually used from -53°C to 204°C.
DM-6451 Used to protect printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. This product is usually used from -53°C to 204°C.
DM-6459 For gasket and sealing applications. The product has high resilience. This product is usually used from -53°C to 250°C.
en English
X